Causes | Solutions |
The surface of the coated object is wet or there are substances such as acid, alkali, salt and oil. | Ensure the cleanliness of the surface of the coated object. |
The surface of the coated object is too rough, resulting in a large amount of paint absorption. | Carefully polish, choose the appropriate sandpaper model and polishing method to eliminate the roughness of the coated surface. |
The primer and the topcoat are not matched.The primer absorbs the topcoat. | Increase the compatibility of primer and topcoat to eliminate the absorption of topcoat from primer. |
The paint film is too thin. | Increase the oil output of the spray gun, slow down the speed of the gun, increase the number of guns, and ensure the thickness of the coating. |
The moisture or oil in the compressed air is not cleanly removed and mixed into the coating to cause loss of gloss. | Ensure the quality of compressed air. |
Paint mixing tools and equipment, painting tools are not clean so that the paint is mixed with water or oil. | Ensure the cleanliness of coating equipment and tools. |
The humidity of the construction environment is high, greater than 90%, and the coating is easy to lose gloss due to water absorption. The application temperature is too high, the drying is too slow, and the water accumulates on the surface tocause loss of gloss. | Control the temperature and humidity of the painting environment. It is recommended to bake and dry during spraying in a low temperature environment |
The air in the drying room is dirty or the baking temperature is too high, resulting in loss of gloss. | Ensure that the air in the dry- ing room is clean and control the baking temperature. |
Paint or thinner mixed with water or oil. | Ensure that the coating equipment and tools are clean. |