Spray the top   coat before the primer layer is completely dry.

After the primer   is fully cured, spray the top coat.

The solvent of   the topcoat is too strong or the primer has poor solubility resistance.

Use appropriate   thinner to eliminate strong solvents that swell the primer.

The topcoat   spray is too wet and thick

For the matching   primer that is easy to lift, spray a top coat thinly on the base coat first,   and then spray after a while

Metallized film   is too thin.

Extend the metal   metallized time to ensure the thickness of the metallized film.

The primer and   topcoat are not matched.

Choose matching   primer and topcoat.